Mapleton Foundation Pros
Patio Lifting in Mapleton, UT
Patio lifting in Mapleton, UT uses PolyLevel foam to re-pitch sunken slabs and stop backyard pooling. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Mapleton and nearby communities.
Backyard patio sinking in one corner, or water pooling against the house after a storm instead of running off? On Mapleton's sloped lots, patio slabs settle unevenly as runoff saturates the soil underneath, and once the pitch reverses, water starts collecting right where you don't want it, near your foundation wall. Mapleton Foundation Pros lifts and re-pitches sunken patio sections with polyurethane foam instead of tearing out the slab.
The fix isn't just raising the low spot, it's getting the slab pitched correctly again so water runs away from the house the way it was designed to. We check the whole patio's grade, not just the obvious dip, before we start drilling.
What's included
What's Included with Patio Lifting
Typically included: Optional: Customer prep:
- Full patio slab assessment and elevation mapping
- Foam injection at low points to lift and re-pitch the surface
- Access hole patching to match the existing surface
- Final grade check to confirm water runs away from the foundation
- Joint filler replacement on expansion joints disturbed during the lift
- Surface sealant application after lifting is complete
- Clear furniture, planters, and grills off the patio surface
- Note which corners or areas pool water after rain or snowmelt
- Keep pets and kids clear of the work area during injection
Want a clearer scope?
Get a Free EstimateHow it works
How Our Patio Lifting Process Works
Step 1Patio Assessment
Settled sections and pooling spots are mapped before drilling starts.
Step 2Access Point Drilling
Small holes placed at key points across the patio surface.
Step 3Foam Injection
Expanding foam pumped beneath the slab to lift settled areas.
Step 4Level Verification
Elevation checked continuously to re-establish correct pitch.
Step 5Hole Patching
Access points filled and smoothed flush with the surrounding surface.
Step 6Final Walkthrough
Patio reviewed with the homeowner to confirm level, stable results.
Materials
Materials and Methods for Patio Lifting
Polyurethane Foam
Lifts the slab with minimal disruption to surrounding landscaping, unlike slurry-based mudjacking that adds weight back onto already-saturated soil.
Patch Compound
Fills and finishes drilled access holes so the surface reads smooth once cured.
Joint Filler
Restores expansion joints after lifting so the slab can still move with Utah's freeze-thaw cycle without recracking.
Surface Sealant
Adds a moisture barrier over the repaired area, worth it on patios that catch spring runoff directly.
Leveling Tools
Confirm consistent elevation and correct pitch across the whole patio, not just the drilled spot.
Bonding Agent
Improves adhesion between new patch material and the existing concrete so patches don't pop loose later.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Patio Lifting Take?
- 01
Assessment
same day - 02
Foam injection and lift
a few hours for most residential patios
- 03
Hole patching
same visit
- 04
Walk-on cure time
a few hours after patching
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits and Codes for Patio Lifting
Check with Utah County or the Mapleton building department if your project involves anything beyond lifting the existing slab.
| Typically needs a permit | Often no permit |
|---|---|
| Extending or rebuilding the patio footprint | Lifting and re-pitching an existing patio slab |
| Any work tied to structural additions attached to the house | Access hole patching and joint resealing |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Patio Lifting
| DIY | Hire a pro |
|---|---|
| Minor cosmetic crack filling on a patio with no settling can be a reasonable DIY task | Getting the correct lift amount at each injection point without over-lifting one panel takes a metered foam pump, not a DIY kit |
| Keeping gutters and downspouts directed away from the patio helps slow future settling | Re-establishing proper pitch across the whole slab (not just the low spot) requires elevation measurement during the work, not guesswork |
| — | Foam volume control matters, too much lift at one hole can crack the slab you're trying to fix |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Patio Lifting
Call Mapleton Foundation Pros for a free patio assessment, especially if that pooling is sitting close to your foundation wall.
- Water pools against the house foundation after rain or snowmelt instead of running off
- One section of the patio has visibly sunk or tilted
- Cracked or separated panels where the slab no longer sits level
- Standing water collects in the same spot every spring
Seeing warning signs?
Get a Free EstimateFAQs
Patio Lifting FAQs
How much does patio lifting cost in Mapleton?
Cost depends on patio square footage, how many panels have settled, and how much foam volume the lift requires. A free on-site estimate gives you an honest number for your specific patio.
How long does patio lifting take?
Most residential patios are lifted and patched in a few hours, with a short cure window before you can put furniture back.
Do I need a permit to lift my patio?
Lifting and re-pitching an existing patio slab usually doesn't require a permit. Extending the patio footprint is a different story.
What's the difference between polyjacking and mudjacking?
Polyjacking uses lightweight polyurethane foam that resists moisture and cures in minutes. Mudjacking uses a heavier cement slurry that can break down faster under Utah's freeze-thaw cycling.
Can a sinking patio mean my foundation is also at risk?
Not always, patio slabs settle independently. But if pooling water is running toward your foundation wall, it's worth having both checked at the same visit.
Will lifting the patio stop the pooling for good?
Lifting corrects the pitch, which solves the drainage direction. If the pooling comes back, it usually means the soil underneath is still settling and needs a closer look.
Is DIY foam lifting a good idea for a patio?
Store-bought kits don't give you the pressure control to lift evenly across a slab. Uneven injection can crack the patio instead of fixing it.
Next step
Get a Free Patio Lifting Estimate
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Mapleton, UT with piering, crack injection, and foundation leveling. Free estimates on bench-lot settlement issues.
Piering and Underpinning
Helical and steel push pier underpinning in Mapleton, UT for bench-lot settlement. Free estimates, written pier plans before any digging.
Wall Stabilization
Wall stabilization in Mapleton, UT with steel anchors and carbon fiber for bowing basement walls. Free estimates, written scope.
Ask about Patio Lifting
Tell us about the project and how to reach you.