Mapleton Foundation Pros logoMapleton Foundation ProsFoundation Repair · Mapleton, UT
Piering And Underpinning photo

Mapleton Foundation Pros

Piering and Underpinning in Mapleton, UT

Helical and steel push pier underpinning in Mapleton, UT for bench-lot settlement. Free estimates, written pier plans before any digging.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Mapleton and nearby communities.

Underpinning isn't a first step. It's what happens after an inspection shows the foundation is genuinely settling, not just cracked on the surface. On bench lots below the Wasatch Range, that usually means one section of the house has less bearing soil underneath it than the rest.

Mapleton Foundation Pros uses steel push piers and helical piers depending on load and depth needed. Both methods carry the structure down to soil that won't keep moving, which is the whole point of underpinning versus patching a crack and hoping.

What's included

What's Included with Piering and Underpinning

Typically included: - Optional: Customer prep:

  • Load assessment and pier count recommendation — Excavation at each pier point - Pier driving or screwing to load-bearing depth -.
  • Bracket connection and foundation lift attempt where appropriate — Backfill and grade restoration.
  • Interior finish patching after lift
  • Engineer sign-off letter
  • Clear perimeter access around the foundation for equipment
  • Flag sprinkler lines or buried utilities near dig points

How it works

How Our Piering and Underpinning Process Works

  1. Load Assessment photo
    Step 1

    Load Assessment

    The structure's weight distribution is analyzed to determine pier placement.

  2. Access Excavation photo
    Step 2

    Access Excavation

    Small excavation points are created along the foundation perimeter.

  3. Pier Driving photo
    Step 3

    Pier Driving

    Piers are driven or screwed into the ground until reaching stable strata.

  4. Load Transfer photo
    Step 4

    Load Transfer

    Brackets connect the piers to the foundation to redistribute structural weight.

  5. Leveling Adjustment photo
    Step 5

    Leveling Adjustment

    Hydraulic equipment carefully raises the foundation to its intended position.

  6. Site Restoration photo
    Step 6

    Site Restoration

    Excavated areas are backfilled and compacted to match the original grade.

Materials

Materials and Methods for Piering and Underpinning

Bench-lot depth to bearing soil varies house to house, so pier selection depends on what the ground actually does under load.

  • Steel Push Piers photo

    Steel Push Piers

    Deliver deep, reliable support for heavier structural loads, driven until resistance confirms bedrock or dense strata.

  • Helical Piers photo

    Helical Piers

    Provide torque-driven support suitable for variable soil conditions found across graded hillside lots.

  • Underpinning Brackets photo

    Underpinning Brackets

    Connect piers securely to existing foundation footings for even load transfer.

  • Hydraulic Lift Systems photo

    Hydraulic Lift Systems

    Used to achieve controlled and precise foundation elevation changes.

  • Galvanized Coatings photo

    Galvanized Coatings

    Protect steel components from corrosion over time in freeze-thaw soil.

  • Compacted Fill Material photo

    Compacted Fill Material

    Used to stabilize soil around newly installed piers.

Timeline

How Long Does a Piering and Underpinning Take?

Underpinning runs longer than crack repair since each pier point needs excavation and testing.

  1. 01

    Site assessment and pier plan

    1–2 days
  2. 02

    Permit approval

    1–2 weeks
  3. 03

    Pier installation

    2–5 days
  4. 04

    Lift and level check

    same day

    as final piers

  5. 05

    Backfill and grading

    1 day

Need a schedule that fits?

Get a Free Estimate

Before & after

Before and After Piering and Underpinning

  • Piering and Underpinning photo
    Before
  • Piering and Underpinning photo
    After

FAQs

Piering and Underpinning FAQs

How do I know if my foundation needs piering vs just crack repair?

If settlement is ongoing, meaning cracks keep widening or floors keep sloping, piering stops the movement. Crack repair alone only seals what's already happened.

How long does underpinning take for a typical house?

A single-family home with 6-10 piers usually takes a few days on-site, though permit approval ahead of that can add a week or two.

Do I need a permit for piering and underpinning?

In nearly every case. It's structural work and Utah County will want to inspect it.

Is DIY piering a good idea?

No. Pier spacing and depth require load calculations most homeowners can't do accurately, and a miscalculated pier can make settlement worse.

What affects underpinning pricing?

Pier count, depth required to hit stable soil, and access around the foundation perimeter are the three biggest cost drivers.

Next step

Get a Piering and Underpinning Estimate in Mapleton

Call +1 (435) 295-5986 or request a free estimate. Mapleton Foundation Pros will walk the site and tell you honestly whether piering is the right call before anything gets scheduled.

Home | Contact | Foundation Repair

---

Ask about Piering and Underpinning

Tell us about the project and how to reach you.

Call (435) 295-5986